Key G control mode enabling solenoid valves to be checked and activated. Once communication between the XR 25 and the computer has been established,Įnter at the required time to obtain this function. The XR 25 memorisation function enables the various values of parameters accessible via the key followedīy 2 figures to be fixed and stored in memory for future use. Present if XR 25 memorisation function is in use. If the fault reappears, carry out a complete check of the ABS wiring and replace the computer if the This fault is taken into account under conditions of extreme use or during external interference.Įrase the computer memory and try to reproduce the fault on a road test. This indication on the XR25 shows a fault on the 4 speed sensors, either a coherence fault for the speed information or a sensor signal excess frequency fault. This fault is taken into account for a speed greater than 15 mph 24 kmh. If correct erase the memory and try to reproduce the fault. Insulation via the intermediate connector located at the rear left. If these points are correct, there is a short circuit in the sensor wiring, check the insulation of the sensor at fault on the 35 track connector. Sensor target air gap risk of interference. there may be mechanical interference : check the sensor is tight vibration and the Sensor ensure it avoids all high frequency generating units.
Sensor info excess frequency fault : - there may be electrical interference : check the routing of the wiring for the faulty If is displayed, preceded by the wheel localisation:
0 kommentar(er)
